Manufacture of the Ancon taper threaded mechanical couplers to reinforcing steel for use in accordance with Technical Approval report TA5015. Manufacture of the Ancon parallel threaded mechanical couplers and anchors to reinforcing steel for use in accordance with Technical Approval reports TA5045, TA5050, TA5055, TA5061 and TA5066. Manufacture of the Ancon Eazistrip Reinforcement Continuity System for use in accordance with Technical Approval report TA5017. Manufacture of Ancon Shearfix double headed shear stud system for use in accordance with Technical Approval report TA5041.

Ancon Eazistrip reinforcement continuity system complying with CARES Appendix TA2 using BS4449 grade B500C reinforcing bar in sizes 10mm to 16mm for use in accordance with Technical Approval Report TA2 - 5017 issue 3

Ancon Bartec parallel threaded mechanical coupler tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5045 Issue 4

Ancon Bartec Plus parallel threaded mechanical coupler tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5055 Issue 3

Ancon CXL parallel threaded mechanical coupler tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5066 Issue 3

BS 4449:2005 Grade B500B Bar 8 to 32mm

APTUS Adjustable Mechanical Couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B for use in accordance with Technical Approval Report TA1-B 5074 Issue 1

Plain round coil feedstock for BS 4449 and BS 4482, 5.5 to 16mm

Production of continuously cast steel billets Production of hot rolled steel wire rod for the reinforcement of concrete

BS 4482 2005 Grade 250 Coil 5 to 13mm Plain round coil feedstock for BS 4449 and BS 4482, 5 to 13mm; Ribbed coil feedstock 10 to 16mm for the production of BS 4449.

BS 4482 2005 Grade 250 Coil 6 to 12mm Plain round coil feedstock for BS 4449 and BS 4482, 6 to 13mm

Production of cold rolled steel coil and steel fabric for the reinforcement of concrete

Production of cold rolled steel coil and steel fabric for the reinforcement of concrete.

Production of BS 4449 2005 B500A Coil 6 to 12mm Production of BS 4483 2005 Production of BS 4482 1985 and BS 4483 1998 Stocking and distribution of BS 4449, BS 4482 and BS 4483

Processing of steel reinforcement products

Processing of steel reinforcement products.

Processing of steel reinforcement as stated on attached appendix Processing of steel reinforcement to BS 8666 Stocking and distribution of BS 4449, BS 4482 and BS 4483. Manufacture of pre-assembled MAG welded fabrications using reinforcing bar in the size range 10 to 50mm to the relevant requirements of BS EN ISO 17660 and BS 8548 and CARES Quality and Operations Assessment Schedules 11 and 12 using tack welds and semi-structural joints produced under factory conditions. Application of Erico Lenton Taper Threaded standard (A12N) and positional (P13LN and P14LN) mechanical couplers to CARES Appendix TA1-B using BS 4449 grades B500B and B500C in the size range 12 to 50mm for use in accordance with Technical Approval report TA1B - 5029. Application of Erico Lenton Taper Threaded standard (A12) and positional (P13 and P14) mechanical couplers to CARES Appendix TA1-B using BS 4449 grades B500B and B500C in the size range 12 to 50mm (A12) and 12 to 40mm (P13 and P14) for use in accordance with Technical Approval report TA1B - 5027. Application of Dextra Griptec standard and positional couplers to CARES Appendix TA1-B using BS4449 grade B500B and B500C in the size range of 16mm to 50mm for use in accordance with Technical Approval report TA 5005. Application of Dextra Griptec standard and positional couplers to CARES Appendix TA1-A using BS4449 grade B500B and B500C in the size range of 16mm to 50mm for use in accordance with Technical Approval report TA 5051.

Production of continuously cast steel billets Production of ingot cast and rolled steel billets Production of hot rolled steel bar for the reinforcement of concrete Production of plain round coil feedstock

Production of steel billets and hot rolled steel bars for the reinforcement of concrete

Armaturis Herisson Plus Standard and Positional Couplers tested in accordance with and complying with BS8597 and additional requirements of CARES Appendix TA1-B, and tested in accordance with and complying with CARES Appendix TA1-C in accordance with Technical Approval Report TA1-B&C 5039 Issue 4

Production of cold rolled plain and ribbed stainless steel for the reinforcement of concrete Processing of stainless steel bars to the customer's requirements

Processing of stainless steel bars for the reinforcement of concrete.

BS 4449 2005 Grade B500A coil 6 to 12mm cold rolled BS 4483 2005

BS 4449 2005 Grade B500C Bar 10 to 40mm BS 4449 2005 Grade B500B Bar 10 to 32mm BS 4449 2005 Grade B500B Coil 6 to 14mm BS 4482 2005 Grade 250 Coil 5.5 to 13.5mm Plain round coil feedstock for BS 4449 and BS 4482, 5.5 to 13.5mm